Smooth Wall HDPE

RUS Acceptance Letter

High Density Polyethylene Duct from PNA has been tested and proven under the most severe conditions. From extreme temperatures to abrasive and high tension applications in underground installations. HDPE from PNA provides quality service and economy in a wide range of uses. As a smooth and flexible duct for cable, HDPE is unequaled for ease of installation and continuous strength.

All Smooth Wall PetroDuct™ is available pre-lubed, with pull tape pre-installed. Joints are available in all sizes.

Sizes Available:
13mm 1/2" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"

Ribbed HDPE

RUS Acceptance Letter

For specialized installation of underground cable, including fiber optics, Petro-Rib™ duct provides superior friction reduction and flexibility. Manufactured from quality High Density Polyethylene resin, Petro-Rib™ offers maximum strength and adaptability on long pulls with numerous turns and elevation changes.

All Petrorib PetroDuct™ is available pre-lubed, with pull tape pre-installed. Joints are available in all sizes.

Sizes Available:
1", 1 1/4", 1 1/2", 2".

Corrugated HDPE

RUS Acceptance Letter

For specialized installation of underground cable, PetroDuct™ Corrugated Duct provides excellent friction reduction and superior flexibility. Manufactured from quality High Density Polyethylene, PetroDuct™ Corrugated Duct offers maximum flexibility in tight turns combined with light weight and superior economy.

All corrugated PetroDuct™ is available in stock with pull tape pre-installed.

Sizes Available:
1", 1-1/4", 1-1/2", 2"

Plenum-Rated PVDF

RUS Acceptance Letter

PNA offers UL LISTED 1" and 1-1/4" corrugated raceways made from Polyvinylidene Fluoride (PVDF), which meet or exceed all UL tests for PLENUM RATED installations.

• Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc
• Excellent mechanical properties over a wide range of temperatures.
• Abrasion resistance and relatively low coefficient of friction.
• PNA uses a PVDF copolymer specfically developed for wire and cable applications, which are very demanding with respect to fire resistance and smoke emissions.
• NOTE: PNA Plenum rated ducts DO NOT eliminate the need for Plenum rated cables.
• UL Listing NO. E182653
  

Sizes Available:
1", 1-1/4"

Fire-Retardant HDPE

RUS Acceptance Letter

PNA offers HDPE Fire Retardant Conduit in 1" and 1-1/4" sizes suitable for Riser applications. Not UL Listed. Orange Only.

Fire retardant duct has been tested and is offered in the top class (UL94 V-O only). Because the process of making Fire-retardant duct eliminates UV protection, it must be installed safe from exposure to natural or any other UV light.

Sizes Available:
1", 1-1/4"

Manufactured to ASTM D2447, ASTM D3035, ASTM D3485, ASTM D2239 and NEMA TC7 Specifications.

Standard colors include black, gray, red, white, blue, yellow, green, orange and terra cotta.

Custom colors available on request.

Other options include embedded stripes, sequential marking and Cable-In-Conduit.